hard plastic deck flooring coating

Painted Concrete Floors • Vintage Revivals

Jun 7, 2012 ... You will want to use a plastic brush and plastic scraper to get the majority of the glue off. Douse ... Use a metal scraper or putty knife to smooth it out as much as you can. ... The Floor and Deck paint is latex based so its not super fumy and let me tell you it is MUCH easier rolling a floor than rolling a ceiling.[ Online Inquiry ]

How to Fill Voids and Knot Holes in Wood - Pretty Handy Girl

May 4, 2015 ... Occasionally, you will get a piece of gorgeous wood that has voids or knots in it. You wouldn't want to add wood putty, because it wouldn't retain the look of the knots. But, you want a smooth surface. The solution is to fill the wood knots and voids with epoxy. The results will be beautiful and you'll be hard ...[ Online Inquiry ]

How To: Use Boiled Linseed Oil (Safely) | The Craftsman Blog

May 4, 2015 ... Boiled Linseed Oil & Metal. A lesser known use for BLO is to protect metal from oxidation. You can apply a thin coat to non-moving parts and once dry it will protect and beautify the surface. Thick coats can get gummy which is another reason you don't want to use this in moving parts which get stuck together ...[ Online Inquiry ]

How to Seal and Protect Your Deck - Pretty Handy Girl

Oct 1, 2012 ... One of the home improvement projects that has consistently been at the bottom of my “to do list” was re-sealing the porch floor. And it would have stayed ... Paint tray (lined with a plastic bag. My easy clean up ... walk on the floor. The results are a smooth coating on your deck that protects it from water stains.[ Online Inquiry ]

How to paint a floor {and what NOT to do}. | All Things Thrifty

Oct 1, 2012 ... If you push too hard your paint will bleed and you'll have a lot of touch ups to do. #2 Rule for stenciling: Make sure to roll off excess paint onto a paper towel near by before you start painting. Put something under the paper towel so that it doesn't paint your floor. Ha! #3 Rule for stenciling: Make sure you wait ...[ Online Inquiry ]

Eartheasy BlogCedar vs. Recycled Plastic vs. Composite Raised ...

Apr 9, 2014 ... Shorter lifespan vs. recycled plastic. It is difficult to predict how long a cedar raised bed will last since there are variables such as the type of cedar used, the soil conditions in your garden, and the weather patterns of different regions. In dry regions such as the Southwest, cedar will last a very long time.[ Online Inquiry ]

Financing Your Deck: FAQs | Seventrust

Although Seventrust costs more initially, you'll never have to sand, stain or paint your Seventrust deck. Over the life of ... Periodic cleanings with a composite deck cleaner were far easier than the dreaded sanding and staining required to maintain wood decks. As the ..... Use plastic shovels (never metal) to remove snow and ice. A metal ...[ Online Inquiry ]

Problems with Epoxy Garage Floor Coating Peeling | Today's ...

Hydrostatic Pressure: If moisture wicks too quickly through your concrete, the epoxy will flake off. To test this, tape a 2' by 2' piece of plastic onto the bare concrete floor, and leave it for 24 hours. If moisture collects on the bottom of the plastic, your floors likely have too much hydrostatic pressure or lack a vapor barrier under ...[ Online Inquiry ]

Product Details

Product List